ABOUT US AUTOMATION PRODUCTS MANUALS BROUCHERS CONTACT US
   
AMP 480 (The Power Box: 480 Watt)
With a generous 480-Watt power output the AMP 480 is the perfect power amplifier for complex PA requirements.
Features :
External signal sources like preamplifiers or mixer amplifiers can be connected by XLR, cinch or jack connectors balanced or unbalanced.
The AMP 480 offers a 100 Volt speaker output and an 8-Ohm connection for low impedance speakers. The amplifier, which is protected against overload and short circuit, comes in a 19-inch /3U housing. A blue power-LED and a LEDVU-meter gives information about the operating condition of the amplifier.
For safe operation a temperature controlled fan and a 24 Volt DC emergency power input are also provided. Also a fine feature is the remote start of the amplifier. Feeding 24V DC to the remote control input bridges the main power switch. And if more power is required, you can easily link it to more amplifiers via the through connectors.
Technical Specifications:
Technical Specifications AMP 480
Power 720W / 480W
Frequency Range 50~20000Hz +3dB
Inputs Line Input: 1V, 47kΩ hm
Symmetrisch, unsymmetrisch,
Balanced, unbalanced
Outputs 8 Ωhm, 100V,
Speech: 100V
Line Output: 1V, 600ohm
THD Less than 1% at 1KHz, rated power
Mains/Battery Voltage AC 230V/240V 50/60Hz
DC 24V (MAX 10% deviation)
Power Consumption 1100W
Dimensions 133 X 483 X 385mm
Weight 24 Kg.
 
Go Top
AMP 4 x 120 | AMP-480
 

Ceiling Mount Speaker | Horn Speaker | Microphone | Mixer | Mixer Amplifier | Power Amplifier | Pre Amplifier | Sound Columns | Wall Mount Speaker | Zone Amplifier